additional_instructions_for_Canon

Additional Instructions For MP530 and MP830

Remove The Cartridge Cover With A Phillips Head Screw Driver

Mount the support arm (the long piece with adhesive on it) where the arrow is pointing (image at left). You might want to trim the support arm as it will protrude past the end of the printer case. Rout the tubing along the support mount securing with the tubing brackets (little black tabs pictured above). The tubing brackets will securely snap into the support mount. Make sure there is no twist in the tubing and that the tubing has just enough play to travel the full distance that the cartridge carrier travels but that it does not have so much slack that it could "bunch up" as the carrier travels across the printer.